Home > Exhibition > Content

How to remove ink stains from wooden cafe tables and chairs

Nov 05, 2019

Ink stains are the most difficult to remove, especially if they are allowed to enter. If the ink stains fall on the wood table and chairs, unfortunately it happens often, which is frustrating. When you consider the price of wooden cafe tables and chairs, especially antiques, it is the heart burning product on the lower right. Take a deep breath. Although difficult to remove, if you know what to do, ink stains are not impossible.

Use detergent to make a cleaning solution. This method is most effective for fresh ink spills. Dishwashing soap works because of its anti-grease properties. It lifts the stain and prevents it from entering the wood. Mix half a teaspoon of liquid dishwashing soap with one third of cup of hot water in a small bowl. The solution was stirred to make a large amount of soapy water.

Finished test. Before using any cleaner on wood, you should test the response of the coating to it. Stick the cotton ball in soapy water and rub it on a small part of the bar stool. Try to find a place you can't see. If the soap damages the surface, stop. If it does not damage the surface, proceed to the next step.

Use a soft cloth to collect some soapy water. Make sure you just go into the bubble, not the solution. Then, gently wipe the ink stains with a soap cloth. Rinse with a clean, damp cloth and then dry with a clean towel.

If you can still see the stain, you can use ultra-fine steel wool (No. 0000) with liquid wax. Gently rub the steel wool over the dyed area. Steel wool should only remove a fine surface. Gentleness is very important, so you won't get rid of too much wood. Wipe the shavings with a clean cloth.

Make a baking soda paste. Baking soda, also known as sodium bicarbonate, is ideal for cleaning because it combines with water to become a lightweight abrasive [2]. It is safe to use on wood because it is mild and effective. To make a paste, add baking soda to a half cup of water. A small amount each time until the mixture becomes viscous.

Apply the paste to the ink stains. Wipe with your fingers to ensure complete coverage of the stain. You don't need to scrub it: let the baking soda get the job done. If you scrub too hard, you may damage the surface of the wood. Wait 10 to 15 minutes.

Clean up. Use a soft cloth dampened with water to remove the paste. Repeat this process until the ink is completely removed. For larger stains, you may need to repeat it multiple times. Once you are satisfied with the results, dry the surface with another soft cloth.

Test mineral spirits. You can find mineral spirits at any hardware store. It is also known as a turpentine substitute. Gently grab the cotton ball with mineral oil and wipe it in the hidden area of the bar stool. If there are some finishes on the cotton, please don't continue.

Wet the fabric with mineral oil. Gently wipe the stained area with a cloth. Then, clean with a damp cloth. If the stain still exists, continue to the next step.

Using ultra-fine steel wool, wipe the stained area with a piece of steel wool with mineral oil. Gently do it and make sure you rub along the wood grain. Try to remove as much as possible. The fewer finishes you remove, the easier it will be to trim the bar tables and chairs later.

Clean the surface. Wipe off the shavings made of mineral oil and steel wool with a clean cloth. The stain should disappear completely. Continue to patch if needed. If not, please wax or polish the protective coating as soon as possible.